News
Your position:Home > News >

Precautions for self installation of high borosilicate glass test tube

Click: -Time:2020-04-26 09:03
1. We all know that the glass obtained in general engineering is not very clean sometimes, and there is some dust on it, so we need to ensure that the surface of high borosilicate glass test tube supplies is clean and bright in color. At the same time, it is necessary to clean the dust and foreign matters in the glass groove to ensure the cleanness of the glass groove.
2. Each project has different requirements on the size of glass. When we follow the process glass lampshade, we need to check whether the size, size and specification of the process glass lampshade are correct.
3. During the installation of high borosilicate glass test tube articles, the gap between the inner and outer sides shall be no less than 2mm. After the installation, ensure the gap between the glass and the inlay groove. This is mainly for the installation of damping pad, which can reduce the impact force when opening and closing the glass doors and windows, so that the glass is not easy to be broken.
4. At this time, we need to fix the installed glass with rubber strip, and pay attention to the size of the rubber strip to match the actual groove size. Pay attention to the tightness during the installation, and there should be no deviation during the installation.
5. Do a good job of inspection, and carefully check whether there is any deviation in the above steps.
high borosilicate glass test tube, clear glass test tube, glass test tube with cork
If you are interested in high borosilicate glass test tube, clear glass test tube, glass test tube with cork or need to consult, please click on our online customer service, or call us.
Pan Chao, customized different quality specifications of the glass.
Pan Chao special industrial glass, tailored for your different quality of the glass.
Welcome sending your inquiry: Phone/WhatsApp : +86 13343800331  Email: sales@panchaoglass.com

Related articles