Glass sight glass installation instructions

Glass sight glass installation instructions
1, sight glass installation; welding flange must be clean and no damage, the operation of professionals.

 

2, mirror lens installation; sure mirror mirror seat smooth, lens and mirror seat between the gasket installed flat, the gasket is not damaged and non-stick grease. Before securing the screws, make sure that the lens holder and the cover are properly installed and then tighten the screws slowly.

 

3, hinged or threaded connection of the mirror device before work to ensure that the gasket is installed well. If necessary, re-tighten the bolts. Make sure that the gasket between the viewing hole and the lens hole is properly installed and that the connecting flange is not damaged and that the connecting screw is adjusted. Not only to ensure that the components connected to the lens lens seal is good, but also to ensure that the lens and the welding flange between the seal are good, and to ensure that the pressure inside the container does not exceed the rated pressure.

 

4, after installation can not have other additional pressure on the mirror, otherwise it will cause the mirror force uneven, resulting in glass mirror glass rupture.

If you are interested in the flange sight glass or need to consult, please click on our online customer service, or call us. Pan Chao, customized different quality specifications of the glass.
Pan Chao special industrial glass, tailored for your different quality of the glass.
Welcome sending your inquiry: Phone : +86 13569413718  Email: info@panchaoglass.com